AS 410 SERIES

The weighing computer AS410 has been designed for weighing on bands and to check the objects size.

According to the preselected, some outputs are activated and they identify if the weight value is right or LOW / TOO HIGH.

The data relevant to the weighing cycles are stored to make the following checks. This weighing indicator can also work in 2 ways:

Dynamic weighing
Static weighing

It is possible buy an optional module that stores the weighing cycles values in order to transfer them to USB pendrive (.csv in format) for a following revision on PC.

Estoy interesado

Solicitar información

Para descargar la ficha técnica, Acceder

Features:

Power supply: through 230V power grid or through 24Vd.c. connection
Dynamic weighing of object with different size
Static weighing of object with a different size
Programmable selection parameters
Weighing cycle times freely adjustable
Format programming with weight value LOW and TOO HIGH
Possibility to program and select 50 different sizes
Possibility of automatic zeroing of the weighing indicator at the beginning of the start cycle
Calculation of numbers of OK weighings (Correct weighings)
Calculation of numbers of LOW weighings (Weighings under the selected value)
Calculation of numbers of TOO HIGH weighings (Weighings over the selected value)
Calculation of the average value of OK weighings (correct weighings)
Reset of the weighings cycle counter
Storage of 10 cycles in the weighings archive
Storage of up to 5000 weighing cycles through USB (Optional)
Storage of weighing cycles through USB Pendrive (Optional)
Available divisions 1-2-5-10
Calibration through load cells values plate
Calibration through load cells chart
Calibration by means of sample weight
Warranty internal control
Overloads control system
Multilingual